What is the difference between silica fume and metakaolin?

Silica fume as an amorphous material does not exhibit the long-range order of a crystal. It is a by-product obtained inside electric arc furnaces used to produce silicon metal and ferro silicon. Being an ultra-fine pozzolanic, it has a particle size of 150nm. Such extreme fineness makes it an ideal ingredient for concrete. Portland cement concrete being the most popular example. Concrete that has silica fume as an ingredient is much more cohesive. Thanks to its very high surface area, it helps reduce water usage while preparing concrete and also reduce bleeding to a great extent.

Zhengzhou, Henan, China, 29th Nov 2022, King NewsWire Silica fume as an amorphous material does not exhibit the long-range order of a crystal. It is a by-product obtained inside electric arc furnaces used to produce silicon metal and ferro silicon. Being an ultra-fine pozzolanic, it has a particle size of 150nm. Such extreme fineness makes it an ideal ingredient for concrete. Portland cement concrete being the most popular example. Concrete that has silica fume as an ingredient is much more cohesive. Thanks to its very high surface area, it helps reduce water usage while preparing concrete and also reduce bleeding to a great extent.

Metakaolin

Metakaolin, as the name suggests, is obtained from the clay mineral kaolinite. It is commonly used in the manufacture of porcelain. Although the metakaolin particle sizes are smaller than concrete, silica fume is much finer in size. As an anhydrous calcinated form of kaolinite, it provides an improved compressive strength while reducing permeability. It is popularly used in high-performance concrete, fiber cement, mortar, and stucco.

Project SiO₂,% Al₂O₃,% Fe₂O₃,% CaO,% MgO,% Cl,% total alkalinity,% specific surface area,㎡/g
Metakaolin 54.66 40.19 0.84 0.12 0.084 0.0037 0.32 15.1
Silica Fume 94.48 / / / / 0.013 / 19.32

Physical Chemical Analysis

Comparison for use in Fly Ash Concrete

As per research, it was observed that the use of silica fume in fly ash concrete reduces slump extension. Whereas metakaolin increases slump extension thereby providing long-time strength. Slump extension for silica fume was only 360Mm, while metakaolin exhibited slump extension of 600Mn. Both materials provide improved resistance against chloride penetration. The diffusion coefficient of chloride ion for silica fume is 3.20, while the coefficient value for metakaolin is 7.47.

Comparison of effects on engineering properties of expansive soil

Expansive soil like bentonite or montmorillonite is used in building several structures around the world. They tend to swell or shrink based on the availability of water volume in their vicinity. It remains a fact that expansive soils damage more homes than floods and earthquakes combined. The structures made of expansive soil can develop cracks and damages based on the differential settlement of soil. Both silica fume and metakaolin are used as additive stabilizer agents to treat expansive soil. The study prepared mixes with varying concentrations of both materials. The addition of silica fume increased the Atterberg limits for the mix, while metakaolin reduced it. Silica fume decreased the specific gravity of the mix and metakaolin increased it. And in synchrony with these changes, metakaolin increased the maximum dry weight and decreased the optimum water content of the mix. The effects were a mirror opposite when silica fume was added to the mix.

Comparison of effects on alkali-silica reactions

High reactivity metakaolin and silica fume were studied for their chemistry of ASR (alkali-silica reaction) products. Both materials controlled the expansion of mortar bars equally. Typically the calcium content in ASR products keeps on increasing with time, the mixes containing added silica fume and metakaolin reduce the pace of growth. Also, the calcium-silica ratio for ASR products kept increasing, following a linear trend.

Kaolin contains 40.19% of Al203 and 54.66% of Si02, which is a high content of active ingredients and is conducive to accelerating the hydration of cement and improving the early strength of mortar or concrete; the specific surface area is 15.lm2/g and the particles are fine, which is conducive to the filling effect of the material. The content of harmful ions and total alkali is so low that it has no adverse effect on mortar or concrete.

Comparison of the fluidity of concrete

Concrete fluidity plays a vital role in the construction business. Properties like spread, slump, and slump loss are carefully controlled. It was concluded in a study that 5% to 15% presence of metakaolin provides better workability for the concrete in comparison to the use of silica fume. As an adjunct inference, the study also observed that the fluidity of metakaolin concrete could be further improved by the use of ground granulated blast furnace slag (GGBS), which is again better than concrete containing silica fume.

Concrete durability comparison

A recent study published in April 2022 reviewed the effects of silica fume and metakaolin on concrete. They checked for gas permeability, water-accessible porosity, electrical resistivity, and chloride ion diffusion. Concrete mixes with varying additive amounts were prepared using different water/binder ratios. Pozzolanic reactions were observed in the microstructure of concrete. Porosity accessible to water decreased from 11% to 1% with the introduction of silica fume in the concrete mix. However, the porosity accessible to water plummeted from 12% to 4% with metakaolin compared to the controlled concrete samples.

Chloride ions diffusion reduced with the introduction of silica fume from 54% to 75%. While the chloride ion diffusion changed from 55% to 86% with the introduction of metakaolin. It was noted that both additives significantly impact the gas permeability of concrete. Metakaolin’s presence reduces permeability from 5% to 28%. In contrast, the permeability reduced from 6% to 22% after adding silica fume. Electrical resistivity goes from 64% to 163% with silica fume and from 50% to 104% with metakaolin.

As both the additives were added, the study also concluded that there is a direct correlation between test durability and compressive strength for different concrete mixes.

At Henan Superior Abrasives, we want to make sure that you can find the right product in the shortest amount of time. Our team of knowledgeable and helpful customer service representatives are happy to answer any questions and walk you through the options. Our products are made from high-quality materials, tested by strict quality control standards, and approved by professional laboratories to ensure consistency. This means that what you buy is exactly what you need without any hidden variables that may affect your project.

Henan Superior Abrasives has been providing the best quality abrasives for over 20 years. We manufacture and export micro silica fume and all of our premium products are widely used in abrasives, refractory, technical ceramics, and many other industries.

Read More Visit : https://hsamaterial.com/blog/is-silica-fume-the-same-as-metakaolin.html

To learn about silicon carbide, please visit: https://www.silicon-carbides.com/silicon-carbide

 

Media Contact

Organization: Henan Superior Abrasives Import & Export Co., Ltd

Contact Person: Yasin Zhao

Email: [email protected]

Website: https://hsamaterial.com/

Address 1: No.68 Zhengtong road

City: zhengzhou

State: Henan

Country: China

The post What is the difference between silica fume and metakaolin? appeared first on King Newswire.

Information contained on this page is provided by an independent third-party content provider. Binary News Network and this site make no warranties or representations in connection therewith. If you are affiliated with this page and would like it removed please contact [email protected]

Information contained on this page is provided by an independent third-party content provider. Binary News Network and this Site make no warranties or representations in connection therewith. If you are affiliated with this page and would like it removed please contact [email protected]

New Zealand Visa For Slovak, Emirate, Slovenia, Uruguay And Italian Citizens

NEW ZEALAND VISA FOR SLOVAK CITIZENS Do you have upcoming travel plans to visit New...

New Zealand Visa For Mauritius, Oman, Qatar, Norwegian Citizens

NEW ZEALAND VISA FOR MAURITIAN CITIZENS The NZeTA, a program that permits electronic submission of...

New Zealand Visa For Latvia, Macanese, Luxembourg, Us, Malta Citizens

NEW ZEALAND VISA FOR LATVIAN CITIZENS The NZeTA was launched in July 2019, allowing eligible...